FAQ for First-Time Users of the Gvacuum Dynamic Lite
Vacuum bell therapy has been part of the conservative treatment options for pectus excavatum for many years. A review published in the clinical literature reports that vacuum bell devices, which apply controlled negative pressure to the chest wall, have more than twenty years of clinical use behind them and have been considered part of conservative treatment protocols throughout that time [1]. This track record shows that the device's general operating principle is well established, while also underlining that the treatment depends on consistent daily use.
The literature frequently stresses that this treatment is a steady, long-term process. Publications examining vacuum bell therapy note that the effect of pressure on the chest wall does not appear after a single session, but emerges through regular use sustained over months [2]. For this reason, learning to use the device correctly and safely is one of the most critical first steps, especially for patients and families who are just starting treatment.
Comparing standard and screen-equipped digital models in clinical settings is a relatively recent development. A study comparing standard and digital screen-equipped vacuum bell models in terms of short-term treatment outcomes reports that both approaches rely on the same basic treatment mechanism, and that the screen's main contribution is making the process easier to monitor and track [3]. The Gvacuum Dynamic Lite vacuum bell is Pectuslab's screen-equipped model, designed within this general framework. In this article, we answer the most common practical questions that patients and families ask when using the device for the first time, in a general and cautious manner.
What Is the Basic Logic of Vacuum Bell Therapy?
A vacuum bell is a non-surgical method that aims to support the gradual remodeling of cartilage tissue over time by applying controlled negative pressure to the chest wall. In pectus excavatum, sometimes referred to as a sunken or funnel chest, the middle and lower part of the rib cage takes on a caved-in appearance; the vacuum bell applies negative pressure to this area at regular intervals to lift the chest wall outward. This is not a one-time procedure, but a treatment process repeated daily according to the plan set by the clinician.
The Gvacuum Dynamic Lite combines this general logic with a digital interface. The device has a three-button control unit (plus, minus, and menu), ten pressure levels, a live pressure and time display, and a target-pressure-hold feature. These features do not change the mechanism of treatment; their purpose is to make it easier for the patient and clinician to follow the process.
First Steps After Unboxing
After unboxing the device, the first thing to do is review the user manual together with the treatment plan provided by the clinician. The Gvacuum Dynamic Lite's pressure settings and duration of use are personalized according to the patient's age, the characteristics of the deformity, and the flexibility of the chest wall; the initial setting should therefore always be determined together with the clinician.
The Quick Start feature, found in the device's menu button, is designed to make first use easier. This feature allows the device to start quickly with a predefined initial setting; however, Quick Start is not a substitute for a treatment prescription — target pressure and duration should be adjusted in later use according to the plan set by the clinician.
Frequently Asked Questions
Below are the questions most often asked by patients and families who are about to use the Gvacuum Dynamic Lite for the first time. These answers are for general information; the pressure, duration, and usage plan specific to each person should always be determined together with the clinician.
What do the device's three buttons (OFF, ON, OK) do?
The three buttons on the control unit manage the device's basic functions: the ON button increases pressure, the OFF button decreases pressure and releases it, and the OK/menu button is used to navigate settings and open options such as Quick Start. Mixing up the buttons does not damage the device; if you accidentally raise the pressure, you can easily lower it or release it with the OFF button.
What do the pressure and time display on the screen mean?
The two main values you see on the screen are the current pressure level and the session duration. With its target-pressure-hold feature, the Gvacuum Dynamic Lite tries to keep the set pressure steady throughout the session; the numbers on the display may show small fluctuations over time, which is normal and not on its own a sign of a problem.
Can I raise the pressure to the highest level right away during first use?
No; pressure should be increased gradually and according to the plan set by the clinician. The ten pressure levels are designed so that treatment can progress slowly according to the patient's tolerance. Starting with a low level in the first sessions and allowing the body time to adjust to the pressure is consistent with the principle of steady, sustainable use emphasized in the literature [2].
How do I know if the vacuum bell is seated properly against the chest wall?
Proper seating of the vacuum bell against the chest wall matters so that pressure is distributed evenly over the targeted area. It is recommended that this fit be checked by the clinician during initial use; if the vacuum bell does not fully contact the skin or air leakage is felt around the edges, pressure may not be applied as intended. In this case, rather than forcing the device, repositioning it or consulting the clinician is the safest approach.
Is a mild sensation of pressure normal while wearing the device, and when should I remove it?
A mild sensation of pressure and tightness is expected in vacuum bell therapy, as a natural result of the negative pressure applied. However, symptoms such as sharp pain, shortness of breath, dizziness, or sudden bruising of the skin are not considered normal; in these cases the device should be removed immediately and a specialist should be contacted directly. Monitoring for such symptoms in the first weeks is especially important for the safe progress of treatment.
How many hours a day should I use it in the first weeks?
Daily duration of use varies according to the patient's age, the degree of the deformity, and the treatment plan set by the clinician. The general principle is consistent, uninterrupted adherence to the recommended duration; in the first weeks, duration is usually increased gradually. The exact schedule should always be determined together with the clinician, based on the patient's tolerance.
What should I do if mild redness or marks appear on the skin?
Mild, short-lived redness in the area where the vacuum bell sits after use is a common occurrence and usually resolves on its own. However, if redness persists, skin irritation increases, or recurring complaints appear in the same area, a specialist should be consulted to review the duration and pressure of use. A thoracic surgeon, pediatric surgeon, orthopedic specialist, or physiotherapist are among the relevant specialties that can carry out this assessment based on the findings.
What happens if I forget to charge the device?
The Gvacuum Dynamic Lite has a control unit that charges via a USB-C connection. The device may not continue to work properly on low battery; checking the control unit's charge level before each session is therefore a practical habit to avoid disrupting the regular treatment schedule.
How can I fit it into my daily life (school, work, home)?
With its portable and compact design, the Gvacuum Dynamic Lite allows daily sessions to continue outside the home as well. In the first weeks, planning sessions in a calm, predictable setting, such as resting at home, can make it easier to get used to the device and the pressure. Over time, within the plan approved by the clinician, usage hours can be spread more flexibly throughout the day; this transition, too, should be gradual.
When should the first follow-up check take place after starting vacuum bell therapy?
The timing of the first follow-up depends on the treatment plan set by the clinician; the general principle is that checks are more frequent at the start of treatment and become less frequent as the process settles. These early checks matter both for assessing whether the device is being used correctly and for evaluating how the chest wall is responding to pressure; appointments in the first weeks should therefore not be skipped.
Can I use it while traveling or away from home?
The Gvacuum Dynamic Lite's portable control unit allows use while traveling as well. However, in the first weeks of use, especially while still adjusting to the pressure, it may be preferable to carry out sessions in a familiar, calm setting. If travel is planned, the device's charge status and the usage schedule for that period should be reviewed together with the clinician beforehand.
What should I do if I see an unexpected indicator on the screen or the device behaves unusually?
If you encounter an unusual indicator on the screen or unexpected behavior, the first step is to safely stop the device with the OFF button and release the pressure. After this, you can consult the user manual; if the issue recurs, it is recommended to contact product support or the clinician directly rather than forcing the device. Such minor uncertainties can be expected in the first weeks and do not mean the treatment has failed.
Should I judge treatment progress by the numbers on the screen?
The pressure and duration values on the screen are a practical tool for tracking daily use; however, the actual progress of treatment is understood through clinical examination of the chest wall. The numbers on the screen may stay steady from day to day or show small variations; this alone does not mean treatment is going well or poorly. For this reason, progress should always be assessed together with the clinician, without reducing it to screen data.
When should I consult a specialist during first use?
Consulting a specialist before and after first use is recommended for the safe and predictable progress of treatment. Setting the device's initial parameters, checking how the vacuum bell sits on the chest wall, and monitoring skin tolerance in the first weeks are all matters that should be evaluated directly with a specialist. Pectuslab can accompany patients and families through this kind of assessment and follow-up process.
Closing
The questions that come up when first using the Gvacuum Dynamic Lite are generally related to getting used to the device's interface and to the steady, daily-use nature of the treatment. Learning what the three buttons do, how pressure is increased gradually, and how the vacuum bell should sit correctly are among the most important steps in the first weeks of the process.
For patients and families, the most reliable approach is to plan the process together with a specialist from the very first use and to keep up with regular check-ups. In this way, the pressure and duration tracking the device offers can be seen not as a decision-making tool on its own, but as a source of information that supports clinical follow-up.
Sources
[2] Haecker FM, Sesia S. "Vacuum bell therapy." Annals of Cardiothoracic Surgery. 2016;5(5):440-449.
Contact Us
Have questions? Talk to our team about pectus treatment products and the right solution for you.



